|
|
 |
|
|
|
|
|
Over 150 models and sizes to match almost any application. Displacements range from
.08 to 2.57 cu. ft./rev. with outboard bearings and optional drive shipped fully assembled.
HD Aerolock
Built for heavy-duty service and high-volumetric efficiency.
- Designed for heavy-duty industrial service.
- 8-bladed rotor for 12 PSI maximum pressure differential.
- Round or square inlet/outlet configurations.
- 6" to 16" sizes.
- Standard 2 Aerolocks include T-3 seals and relieved-tipped rotors for handling materials
that tend to build up on the housing (such as sugar) or handling plastics which tend to smear
on the housing.
- Special clearances for materials such as sugar or starch.
- Stainless steel construction optional.
- Standard 6 Aerolocks include flat-tipped rotor and lip-type seals for conveying flour.
- Optional air purge seals for abrasive or sticky materials.
- Optional Nedox®, tungsten carbide, or chrome interior coatings for highly-abrasive materials.
- Drive assemblies available.
LD Aerolock
Flexible-tipped rotor minimizes air loss.
- Designed for use in low pressure or low vacuum service.
- 3 PSI maximum pressure differential. Flexible-tipped, 6-bladed rotor keeps air loss to a minimum.
- Ideally suited for continuous discharge from a cyclone or filter-type dust collector where a
head of material does not build up on top of the Aerolock’s inlet.
- 6" to 16" sizes.
- Round or square inlet/outlet configurations.
- Drive assemblies available.
MD Aerolock
The maximum-duty Aerolock is engineered for continuous, 24-hour service.
- Designed for continuous, 24-hour maximum-duty service.
- 10-bladed rotor for 20 PSI maximum pressure differential.
- Round or square inlet/outlet configurations.
- 6" to 16" sizes.
- Standard 3 Aerolocks for the Chemical Industry with relieved-tipped rotors for conveying materials that
tend to build up on the housing; e.g., Calcium Carbonate, Sodium Bicarbonate, soap pellets and Sodium
Tripolyphosphate.
- Special clearances for materials such as sugar or starch.
- Stainless steel construction optional.
- Standard 4 Aerolocks include hubbed rotors (keeping the material away from the end plates) for handling
abrasive powders. It utilizes packing gland seals.
- Optional air purge seals for abrasive or sticky materials.
- Optional Nedox®, tungsten carbide, or chrome interior coatings for highly-abrasive materials.
- Drive assemblies available.
BT Aerolock
The blow-through Aerolock is designed for complete rotor cleanout.
- Designed for heavy-duty industrial service.
- 8-bladed rotor for 12 PSI maximum pressure differential.
- Blow-through configuration enhances rotor cleanout and makes installation in tight quarters possible.
- 8" to 16" sizes.
- Rectangular inlet configuration.
- 10" size available in round configuration.
- Standard 7 Aerolocks include flat-tipped rotors and lip-type seals for the milling and baking industry.
- Optional T-3 seals and relieved-tipped rotors for handling materials that tend to build up on the housing
(such as sugar) or handling plastics which tend to smear on the housing.
- Special clearances for materials such as sugar or starch.
- Optional Nedox®, tungsten carbide, or chrome interior coatings for highly-abrasive materials.
- Drive assemblies available.
QC Aerolock
Designed for quick and easy disassembly and reassembly by one person, making it ideal where
contamination is a concern; e.g., food, chemical, plastic and pharmaceutical industries.
- Built to exacting tolerances for trouble-free reassembly every time. Original clearances are maintained
without adjustment.
- Optional support carriage fully supports the rotor as it is removed for cleaning.
- Designed for 24-hour continuous, maximum-duty service.
- 10-bladed rotor for 20 PSI maximum pressure differential.
- Round inlet/outlet configuration.
- 6" to 16" sizes.
- Relieved-tipped rotors for conveying materials that tend to build up on the housing; e.g., Calcium
Carbonate, Sodium Bicarbonate, soap pellets and Sodium Tripolyphosphate.
- Special clearances for materials such as sugar or starch.
- Stainless steel construction optional.
- Optional hubbed rotors (keeping the material away from the end plates) for handling abrasive powders.
- Optional air purge seals for abrasive or sticky materials.
- Optional Nedox®, tungsten carbide, or chrome interior coatings for highly-abrasive materials.
- Drive assemblies available.
|
|
|
|
|
|
